BƠM ĐỊNH LƯỢNG D.P POMPE _ UG Series

METERING (DOSING) PUMPS _ DP POMPE - ITALY

DÒNG UG Series

Nhà sản xuất: DP POMPE  - Italy

Model: UG series

D.P. Pompe is an italian metering pumps manifacture. It operates in this market from over thirty-five years, and this long experience has allowed to become one of the leader in this sector.

All the pump's part are developped and realized by skilled personnel using last generation numerical control machining center, in order to guarantee high quality and reliability. Further, each pump is tested.

Công ty Môi Trường Hành Trình Xanh hân hạnh là nhà phân phối chính thức sản phẩm Bơm Định Lượng D.P Pompe - Italy tại thị trường Việt Nam. Chúng tôi cam kết cung cấp sản phẩm và dịch vụ tốt nhất tới Quý Khách hàng.

Thông Số Kỹ Thuật:

• Lưu lượng max: tới 347 lít/h
• Cột áp max: 150 bar
• Kiểu: Bơm Định Lượng Piston
• Đầu bơm: PVC, Inox 304, Inox 316
• Màng bơm: NBR/PTFE

Introduction

The dosing pumps type UG are studied to offer high reliability and metering precision also after a long working period.
The simple construction permits the maintenance operations to unexperienced personnel.
The pumps UG are manufactured according to the Standards 89/392 CE and following modifications. 

Construction
The pump casing on which is installed the gear is made of die-cast aluminium and it is in monobloc execution, as well as the lantern of the pump head and the lantern of the motor.
The pumping head can be mde in different types of Stainless Steel or plastic materials.
The plunger is manufactured in different types of Stainless Steel or in Alumina. 

Working principle
The dosing pumps type UG are plunger type with spring return.
The electric motor drives the plunger through a gear type worm and worm wheel installed in the pump casing. The wheel is installed on the side of the driving shaft that pushes the plunger through a cam.
The reurn of the plunger is assured by the releasing of the spring installed on the piston that is compressed during the pushing phase.
The gear is oil lubricated and it is supported at the ends by overdesigned ball bearings.
The flowrate can be adjusted manually or automatically with elctric or pneumatic strike positionners.
The adjusting system is based on a regulation micrometric screw with a rod that shuts the plunger stroke.
This system assures the dosing accuracy and the repeatibility.
The dosing range varies from 0 to 100% of the flowrate.

Electric motors
s are manufactured according to the Standards UNEL-MEC.
The main characteristics are: frame B14, eurovoltage, 3 phases, multyfrequency, mechanical protection IP 55 and insulation Cl F.
On request it is possible to install single phase motors.