QUẠT THỔI KHÍ MAPRO - ITALY

SIDE CHANNEL MACHINES - CL Series

QUẠT THỔI KHÍ DẠNG CON SÒ + TURBO _ MAPRO - ITALY

QUẠT HÚT THỔI KHÍ DẠNG CON SÒ + TURBO _ MAPRO - ITALY

QUẠT CON SÒ	QUẠT THỔI KHÍ TURBO	QUẠT HÚT KHÍ TURBO

Nhà sản xuất: MAPRO - ITALY

Model: CL series (dạng con sò)

Từ năm 1959, MAPRO đã sản xuất và xuất khẩu Máy Thổi Khí BioGas và Máy Thổi Khí công nghiệp trên toàn thế giới. Công ty Môi Trường Hành Trình Xanh hân hạnh là nhà phân phối chính thức sản phẩm Máy Thổi Khí BIOGAS MAPRO tại thị trường Việt Nam. Chúng tôi cam kết cung cấp sản phẩm và dịch vụ tốt nhất tới Quý Khách hàng.

Most of the blower models for air are also manufactured in conformity to the requirements of the European Directive 2014/34/EU (ATEX) for Zones 1 and 2, 21 and 22.

1. QUẠT THỔI KHÍ CON SÒ _ Blowers

2. QUẠT HÚT KHÍ CON SÒ _ Exhausters

3. QUẠT THỔI KHÍ TURBO _ TBT Blowers

4. QUẠT HÚT KHÍ TURBO _ TBT Exhausters

THÔNG SỐ KỸ THUẬT

Ưu điểm

• dễ dàng cài đặt
• độ ồn thấp
• không rung động
• Dòng khí thoát ra không có sự va đập
• bảo trì đơn giản
• Hơn nữa, không có dầu bôi trơn bên trong và do đó khí di chuyển qua máy không bị ô nhiễm và hoàn toàn không có dầu

Các lĩnh vực ứng dụng phổ biến nhất

• Cung cấp khí trong nhà máy
• Cung cấp khí cho hệ thống xử lý nước và nước thải

Operating principle
The side channel blower or exhauster increases the pressure of the aspirated gas by the creation, in the peripheral toroidal channel, of a series of vortexes caused by the centrifugal thrust of the impeller. While the impeller is rotating, the vanes force the gas forward and, because of the centrifugal thrust, outwards, producing a helical motion. During this motion, the gas is recompressed repeatedly with a consequent linear pressure increase along the length of the channel.
 

Applications and advantages
Side channel blowers are suitable for all those applications requiring considerably higher pressures than that which can be achieved using centrifugal fans. Side channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as high as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. There is therefore no friction during operation and thus no internal lubrication is necessary. The gas moving through the machine therefore remains uncontaminated and completely oil-free.
The other main advantages of using side channel machines are:

• easy installation;
• low noise level;
• no vibration and therefore complete dynamic stability;
• pulsation free discharge;
• minimal maintenance.

TBT BLOWERS AND EXHAUSTERS
The TBT blowers and exhausters are machines with a peripheral toroidal channel, similar to side channel blowers, but with a revolutionary heliflow impeller and channel developed through long research and testing. With this impeller and channel design, performances similar to positive displacement machines can be achieved, with none of the associated problems and, indeed, with some added advantages:

• Quiet operation (10÷15 dB less than a positive displacement machine);
• vibration free;
• pulsation free;
• oil free;
• low maintenance (inlet filter cleaning and occasional greasing of the bearings only). Bearing replacement can be carried out without disassembling the machine casing.

In the TBT design, the aspirated gas is forced along the two peripheral channels in parallel, or, by modifying the inlet and outlet porting, one of the channels can be
excluded thus obtaining a machine (TBT-HF) with half the flow rate at the same outlet pressure. Because of the wide range of permissible operating speeds of rotation (from 2000 to 5500 rpm), a very large operating range can be achieved using a single machine size. The casing and impeller are made from aluminium alloy and the shaft from alloy steel
By using different types of shaft sealing, most industrial gases as well as natural and biological gases can be In the case of corrosive gases, the internal wetted parts can be treated or lined with protective coatings. To suit all applications, a complete range of accessories is available, such as: filters, silencers, flexible hoses, non return valves, pressure and vacuum relief valves, manual and automatic cut-off valves, pressure gauges, thermometers, vacuum gauges, temperature switches, pressure switches, acoustic enclosures quiet operation (10÷15 dB less than a positive displaceintenance (inlet filter cleaning and occasional greasing.